Directional Control Valve with Flow Control Function “WE42…MC” - X820 Series

2-Way Slip-in Cartridge Valves – Position Monitored – CSE Series (3)

The X820 directional valve essentially consists of the longitudinal spool, the housing, and the corresponding actuating element.

The spool is shifted by solenoids, allowing pressurized oil to flow from port P to port A or B and then connecting the alternative port to the tank (T). By switching off the actuator, the spring can move the spool back to the center. The manual override option allows the spool to be operated manually.

Contact

Overview

When used as a pilot valve for a cartridge, it provides a very soft opening characteristic in combination with a very fast closing capability.

Compact, cost-effective design thanks to integrated flow control function
Low pressure drop at high flow rates due to optimized low-pressure paths in the housing and coil design
Mounting configuration according to ISO 4401-03
Inductive position switch for indicating the starting position
Quick and easy coil change without risk of leakage
Individual electrical connection of the solenoid coils according to ISO 4400/DIN 43650
The surface of the valve housing is phosphated and the actuating magnets are galvanized.
Each valve is tested before delivery